Q. How is the treatment done? Do I have to vacate the premises?
A. Casey O'Dell explains how a chemical injection is performed, and what you can expect.
Watch video

Q. I found these bugs. How do I know if they are termites?
A. The easiest way to identify a termite is by looking at its body. A termites body is more
cylindracal than that of an ant. An ant has definite sections to its body. Of course, if this is
not helpful, then we suggest contacting BPC Structural Pest Control for further assistance.

Q. How often should my home be inspected for termites and other wood destroying problems?
A. There are no set guidelines. If you decide to sell your home, you most likely will be required to have a full termite report for escrow.
Normally, it's suggested that you have an inspection completed every 2 - 3 years to avoid any costly surprises.
BPC offers a free limited inspection. You may want to consider a yearly service agreement.



Q. How destructive are termites?
A. Nationwide, termites cause over a billion dollars annually—more than all tornadoes, hurricanes and windstorms combined. It is not unusual for a termite to feast on a building throughout a life span of 15 years—and the queen can live and produce eggs for many, many years.


Q. Are there different kinds of termites?
A. Entomologists have identified over 2000 species, 55 of which exist in the United States. There are basically only two kinds that homeowners have to worry about; subterranean termites and drywood termites.


Q. I used to have termites but they went away.
A. No they did not go away they are just hidden inside wood members and are feasting away.


Q. I have termite swarmers what can I do?
A. Don't panic! Call BPC for an inspection. In the mean time try to find where they are coming from, get a sample and mark that area for the termite inspector. There is not much else to do but vacuum up the swarmers and clean up the area.
BPC offers a free limited inspection. You may want to consider a yearly service agreement.


Q. What is fungus dryrot?
A. Fungus or often called dryrot is caused by an excessive moisture condition. Often you will have to remove the damaged material and replace it with new material and locate the moisture source and correct it.